ESE 606 DHS-GT is a versatile compound-regulated synchronous petrol generator for professionals. It supplies both 400 V three-phase and 230 V single-phase equipment. Its continuous power is 7.0 kVA / 5.6 kW.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

ESE 606 DHS-GT – features

• Continuous power 7.0 kVA / 5.6 kW, maximum power (LTP) 8.3 kVA / 6.6 kW
• 400 V, 50 Hz, rated current 10.1 A, cos φ 0.8
• Honda GX390 engine, single-cylinder four-stroke, 389 cm³
• Recoil starter
• 30-litre tank, consumption 2.1 l/h and run time 14 h at 75 % load
• Outlets: 230 V/16 A, CEE 230 V and CEE 400 V/16 A
• For inverter welders up to 3.25 mm electrodes
• Automatic low-oil shutdown and overload protection
• IP23 rating, weight 86 kg

Compound regulation handles high starting currents

A compound-regulated synchronous generator handles loads with a high starting current particularly well. For example, these include pumps, compressors and saws.

The manufacturer gives indicative maximum loads of 5500 W, 3700 W and 2800 W for different device groups. The higher the starting current of a device, the lower its limit.

In addition, you can run inverter welders up to 3.25 mm electrodes.

ESE 606 DHS-GT on site and in service vehicles

The machine suits workshops, construction companies, landscaping, agriculture and service vehicles. As a result, one machine gives you both three-phase power and 230 V.

With the 30-litre tank, the run time is 14 hours at 75 % load. This long run time helps on mobile sites where refuelling is difficult.

In addition, the recoil starter and the HONDA OHV engine keep operation simple and reliable.

Moving and comparison

The weight is 86 kg, and the dimensions are 800 x 538 x 576 mm. An optional wheel set makes moving easier.

If you only need 230 V power, ESE 406 HS-GT is a good fit. However, for more three-phase power and electric starting, choose ESE 1206 DHS-GT ES.

Safety

The automatic low-oil shutdown and the generator overload protection protect the engine of the ESE 606 DHS-GT from damage. The IP23 enclosure protects against splashes; however, do not leave the machine in the rain.

Exhaust gas contains carbon monoxide, which can kill. Therefore, run the generator outdoors only, where air moves freely. Keep it away from doorways and air intakes.

Follow the manufacturer’s instructions for earthing and connections. In addition, refuel only when the engine is off and has cooled down.

Only a qualified electrician may connect the generator to a building’s electrical network. This way, the generator does not feed voltage into the distribution grid. You can read about the requirements for electrical work on the Tukes website.

ESE 606 DHS-GT – technical data

Frequently asked questions

Can you weld with the ESE 606 DHS-GT?

Yes, with inverter welders up to 3.25 mm electrodes.

How long does the generator run on one tank?

The run time is 14 hours at 75 % load. The tank holds 30 litres.

Does the wheel set fit this model?

Yes. The wheel set for tubular frame generators fits the ESE 306, 406, 506 and 606 models.

What is the product number?

The product number (MPN) is E112305. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and tell us which equipment you will use, its starting currents and whether you need the wheel set. We put the generator, extension cables and distribution boards in the same quote.