Mobile heat pump MW40 is a 42.4 kW plug-in air-to-air heat pump that blows warm air into construction sites and other temporary spaces. You install the pump outdoors, and it operates at outdoor temperatures of -20…+25 °C.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

Mobile heat pump MW40 – features

• Rated heating output 42.4 kW (A7/L35)
• COPh 3.07 (A7), 2.76 (A2) and 2.30 (A-7); SCOPh 2.72
• Airflow 8000 m³/h, air pressure up to 200 Pa
• Operating temperature -20…+25 °C
• Air hose connection ø 525 mm; straight supply and return hoses up to 32 m in total
• Heated condensate hose
• Supply 32 A CEE + 230 V schuko, voltage 400 V 50 Hz
• Web portal, built-in router and WiFi
• Refrigerant R454C
• IP rating IP44
• Manufacturer Kroll, made in Germany, 3-year warranty

Mobile heat pump MW40 – how it works

The pump works on the same principle as household air-to-air heat pumps. However, the outdoor and indoor units come in the same package.

One ø 525 mm hose blows warm air into the interior under high pressure. A second hose, in turn, draws air from inside back to the pump for heating.

The condensate hose is heated, so it does not freeze in sub-zero weather. The hose heating, however, needs its own 230 V / 16 A supply.

Efficiency, air transfer and model choice

A special feature is the high heating efficiency. For example, the COPh at +7 °C is 3.07.

In frost, the efficiency drops: at -7 °C the COPh is 2.30. The seasonal efficiency SCOPh is 2.72.

Straight supply and return hoses can be up to 32 m long in total. However, corners and bends shorten the distance the warm air travels. If needed, you can boost the transfer with duct fans.

When you need double the output, choose the MW80: 96.7 kW and 16 000 m³/h. If you also need cooling, the alternative is the MWK40.

You can find all models on the mobile air-to-air heat pumps page.

Mobile heat pump MW40 – installation and control

The connection requires a 32 A supply for the pump and a 230 V / 16 A supply for the heated condensate pipe.

You install the pump on a level, firm base close to the building you heat. In addition, leave 2 m of free space at the sides of the pump for airflow.

You control the pump through a web browser. In the portal, you adjust the temperature and fan speed, set alarms and monitor efficiency.

Safety

The pump weighs 1080 kg. Therefore, use suitable lifting equipment for moving and lifting, and check the load-bearing capacity of the base before placement.

The IP44 enclosure protects against splashing water. A qualified refrigeration technician services the refrigerant circuit.

A qualified electrician makes the electrical connections. You can find the requirements for electrical work on the Tukes website.

Mobile heat pump MW40 – technical data

Frequently asked questions

At what temperatures does the pump operate?

The operating temperature is -20…+25 °C.

Which electrical connections does it need?

A 32 A CEE supply for the pump and a 230 V / 16 A supply for the heated condensate pipe.

How long can the air hoses be?

Straight supply and return hoses can be up to 32 m in total. Corners and bends shorten the distance.

What is the product number?

The product number (MPN) is 804010001. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and tell us the size and location of the space and the available power supply. We size the pump and hoses for your site.