16A splitter 3x230V is a versatile and durable splitter for worksites and industry. It takes its supply through a 1 m H07RN-F 3×2.5 mm² cord with a 16A plug.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

16A splitter 3x230V – features

• Three 230 V Schuko sockets, all IP44
• Outlets 3 x 230V/16A
• 1 m H07RN-F 3×2.5 mm² cord
• Mounting hole for hanging
• Operating temperature –25 °C to +40 °C
• PCE sockets and plugs
• ABS body, dimensions 20x10x8 cm, weight 0.5 kg
• Made in the EU

Three protected 230 V outlets

The splitter has three 230 V Schuko sockets, and all of them are IP44. As a result, you can use it safely outdoors as well as in damp and dusty rooms.

On a site, always connect the 16A splitter 3x230V to a socket with 30 mA RCD protection.

Mounting hole makes hanging easy

For example, the mounting hole lets you hang the splitter on a wall or on a scaffold. However, never leave it hanging by the cord alone.

The operating temperature range is –25 °C to +40 °C, so the splitter suits year-round use.

Quality components, made in the EU

The 16A splitter 3x230V uses high-quality PCE Schuko sockets and plugs for long and reliable service. Also, it is an EU-made product.

It especially suits sites where one 16A supply must feed three separate 230 V sockets. For example, it feeds hand tools and other small devices indoors and outdoors.

16A splitter 3x230V in practice on site

With the 16A splitter 3x230V, one supply point gives several outlets without a separate board. So it is the fastest way to add work points where the board is far away.

Divide the loads evenly between the outlets. However, the total current of all outlets passes through the same supply connector, so the splitter adds no power.

The splitter has no RCD. Instead, protection comes from the feeding board or from a separate RCD adapter.

How to choose the right model

First, the choice starts from the size of the supply point. Take the size that matches the most common supply point on your site, so you need the fewest adapters.

Also think about how many splitters the site needs at once. After all, one unit next to the board is not enough when work points are on several floors.

Finally, you can see the full range in the electrical accessories product group.

Compatibility with other equipment

The accessory is part of a set, so choose it together with the other site equipment. When the connectors match the boards and extension cables, you need no extra adapters.

Generally, the supply comes from a site sub-distribution board. See also the plug-on sub-distribution boards and the matching extension cables. For RCD protection, see the RCD adapter 230V 16A/30mA.

16A splitter 3x230V – safety

On a site, people connect and disconnect cables every day. Moreover, connection points are the most common fault spot. Therefore, check the accessory as carefully as the board.

Before every use, check the enclosure for cracks, the connectors for burn marks and the cable for crush damage. Replace a damaged unit completely, because the IP rating no longer applies if the casing is broken.

Finally, only a qualified electrician may do fixed installations and repairs. You can read more about the requirements on the Tukes website.

16A splitter 3x230V – technical data

Supply	16A
Outlets	3 x 230V/16A
Cord length	1 m
Cable	3×2.5 mm² H07RN-F
IP rating	IP44
Material	ABS
Dimensions	20x10x8 cm
Weight	0.5 kg

Frequently asked questions

Can I use the 16A splitter 3x230V outdoors?

Yes. IP44 protects it against dust and splashing water, and the operating temperature range is –25 °C to +40 °C.

Can I hang the splitter on a wall?

Yes. The body has a mounting hole for hanging. However, never leave the unit hanging by the cord alone.

Which socket should I connect the splitter to?

Always to a socket with 30 mA RCD protection.

Does the splitter have an RCD?

No. Protection comes from the feeding board or from a separate RCD adapter.

Request a quote

Add the product to the quotation basket and tell us how many splitters and what other site equipment you need.