ESE 15 YW-B is a 1500 rpm synchronous diesel generator for demanding, long-running professional use. Its continuous output (PRP) is 12.81 kVA / 10.25 kW. The Yanmar engine meets the EU Stage V emission standard.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

ESE 15 YW-B – features

• Continuous output (PRP) 12.81 kVA / 10.25 kW, 400/230 V, 50 Hz
• Rated current 18.5 A (3~)
• Yanmar 3TNV88F-UGPGE diesel engine, 1642 cm³, water-cooled, Stage V
• Running time 20.2 h at 75 % load
• Outlets: CEE 400 V 32 A and 16 A, 2 x CEE 230 V/16 A, 1 x 230 V/16 A
• Noise-insulating housing and galvanised hood for corrosion protection
• Automatic low-oil shutdown and overload protection with a circuit breaker
• Central crane lifting eye for moving the unit
• Electric start

Quiet 1500 rpm running for long shifts

The slow-running engine runs smoothly and keeps noise down. For example, the sound pressure level is 68 dB(A) at 7 m. The ESE 15 YW-B therefore also suits noise-sensitive areas.

The running time is 20.2 hours at 75 % load.

Typical uses include construction sites, industry, standby power for properties and service vehicles.

Built for worksite conditions

The galvanised hood gives effective corrosion protection. In addition, the noise-insulating housing keeps running noise low.

The central lifting eye lets you lift the unit from a single point. This makes moving it on site or at the installation location easier.

The circuit breaker protects the outlets against overload. Meanwhile, the low-oil shutdown stops the engine before damage occurs.

ESE 15 YW-B compared with the ESE 10 and ESE 20

The YW-B models share the same outlets, so you choose by output. The ESE 10 YW-B delivers 8.7 kVA, this model 12.81 kVA and the ESE 20 YW-B 17.6 kVA.

Note that the rated current is 18.5 A. The generator cannot supply more current from the 32 A outlet than its own output allows.

If you need a 63 A outlet or a large fuel tank, see the ESE 20 YW/RS.

Safety

Overload protection and the automatic low-oil shutdown protect both the engine and the connected equipment.

Engine exhaust contains toxic carbon monoxide. Therefore, run the generator only outdoors or in a well-ventilated place where exhaust cannot enter buildings.

Follow the manufacturer’s instructions for earthing and connections. In addition, refuel only when the engine is switched off.

Connecting the generator to a building’s electrical installation is always a job for a qualified electrician. The requirements for electrical work are explained on the Tukes website.

ESE 15 YW-B – technical data

Continuous output (PRP)	12.81 kVA / 10.25 kW
Engine continuous output (PRP)	12.4 kW
Rated voltage	400/230 V, 50 Hz
Rated current 3~ (PRP)	18.5 A
Alternator	Synchronous
Voltage regulation	Electronic
Engine	Yanmar 3TNV88F-UGPGE, Stage V
Displacement	1642 cm³
Cooling	Water
Speed	1500 r/min, mechanical governor
Fuel	Diesel
Running time at 75 % load	20.2 h
Starting	Electric, 12 V
Sound power level LWA	93 dB(A)
Sound pressure level LPA (7 m)	68 dB(A)
Sockets	1 x CEE 400 V/32 A, 1 x CEE 400 V/16 A, 2 x CEE 230 V/16 A, 1 x 230 V/16 A
Protection	Circuit breaker, low-oil shutdown
Lifting	Central crane lifting eye
Product number	E315011

Frequently asked questions

Which outlets does the generator have?

It has CEE 400 V/32 A and CEE 400 V/16 A outlets. There are also two CEE 230 V/16 A outlets and a 230 V/16 A socket.

How long does it run on one tank?

The running time is 20.2 hours at 75 % load.

How does the ESE 15 YW-B differ from the ESE 10 YW-B?

The outlets are the same. The continuous output is 12.81 kVA here and 8.7 kVA on the ESE 10 YW-B.

What is the product number?

The product number (MPN) is E315011. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and send your request. Tell us which equipment the generator will run and for how long. We can combine the generator, extension cables and distribution boards in the same quote.