Dehumidifier 50L PRO with pump is a professional Staring condensation dehumidifier for worksites and water damage sites. It removes up to 50 litres of water a day and dries rooms of about 120 m². Because the built-in pump removes the condensate automatically, the unit runs for days without site visits.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

Dehumidifier 50L PRO – features

• Drying capacity 50 l/24 h (30 °C, RH 80 %) and 31 l/24 h (27 °C, RH 60 %)
• Drying area up to 120 m²
• Airflow 350 m³/h
• Built-in condensate pump, lift height 4.5 m
• 4.5 m discharge hose included
• Digital control, humidity setting and timer
• Power input 650 W, 220–240 V 50 Hz
• Refrigerant R290, 0.15 kg
• Operating temperature 5–35 °C, sound level 64 dB
• Weight 38 kg

Who is the Dehumidifier 50L PRO for?

The unit is for construction sites, drying after water damage, renovations, basements and storage rooms.

It is the right choice for about a hundred square metres when drying takes several days. For larger rooms, the 65-litre model is more powerful.

The pump keeps drying running day and night

The built-in condensate pump of the Dehumidifier 50L PRO lifts the water up to 4.5 metres. In addition, a 4.5-metre discharge hose comes with the unit.

Run the hose out of a window, into a sink or to a drain on an upper floor. So drying does not stop because of a full tank, which matters at night and at weekends.

Moreover, automatic defrosting keeps the evaporator free of ice in cool rooms too.

Digital control, humidity setting and timer

You set the target humidity directly on the display, and the unit then starts and stops accordingly.

With the timer, you can limit drying to outside working hours, for example. As a result, the automation avoids needless running, lowers power use and protects structures from overdrying.

Dehumidifier 50L PRO – built for site conditions

The stackable frame is steel and plastic. So you can transport units stacked and store them in a small space.

The air path keeps humid air away from corrosion-prone parts. This clearly extends the service life on site. In addition, the filter is easy to change, and you should check it weekly.

Although it weighs 38 kg, the telescopic handle and large wheels take it over uneven site ground.

How to size drying correctly

Size the drying by the room size, the initial moisture and the target time, not by floor area alone.

• Floor area and room height of the space
• Moisture content of the structures and the target level
• Available drying time
• Room temperature – the capacity falls with the air temperature
• Air movement: fans speed up drying significantly

In addition, the refrigerant is propane, R290, with a charge of only 0.15 kg. Its warming effect is very small compared with traditional HFC refrigerants, and the circuit is sealed.

Part of site moisture control

Fans boost drying, so combine the dehumidifier with a suitable fan from our fans range.

If you are still comparing models, see the WiFi-controlled version without a pump or the whole dehumidifiers range.

Dehumidifier 50L PRO – safety

Transport the unit upright. If it has been on its side, let it stand for two hours before starting. Then the compressor oil can settle.

Keep the discharge hose free, so that the water can flow out. Also check the filter weekly, because a clogged filter quickly lowers the drying capacity.

Only a qualified electrician may do electrical repairs. You can read more about the requirements on the Tukes website.

Dehumidifier 50L PRO – technical data

Drying capacity	50 l/24 h (30 °C, RH 80 %), 31 l/24 h (27 °C, RH 60 %)
Drying area	up to 120 m²
Airflow	350 m³/h
Voltage	220–240 V, 50 Hz
Power input	650 W
Condensate pump lift height	4.5 m
Discharge hose	4.5 m, included
Refrigerant	R290, 0.15 kg
Operating temperature	5–35 °C
Sound level	64 dB
Dimensions (L x W x H)	560 x 500 x 670 mm
Weight	38 kg
Product number (MPN)	401020001

Frequently asked questions

How large a space does the Dehumidifier 50L PRO dry?

The unit suits rooms of about 120 m². However, the real capacity depends on the room height, the temperature and how airtight the room is.

How high does the pump lift the condensate?

The lift height is 4.5 metres, and a hose of the same length comes with the unit.

Can the unit run continuously?

Yes. Thanks to the pump, drying continues at night and at weekends, as long as the discharge hose is free.

Does it work in a cold room?

The operating temperature is 5–35 °C, and automatic defrosting keeps the evaporator free of ice. Below ten degrees, however, heat the room at the same time.

What is the product number?

The product number (MPN) is 401020001. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and tell us the size of the space and the drying time you have. You can collect several products in the basket and send the whole list at once.