The Submersible pump STP-TOP25F set for household use removes water efficiently and reliably. For example, it empties a basement, a pool or a well. It draws water down to a level of 2.0 mm.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

Submersible pump STP-TOP25F – features

• Draws water down to a level of 2.0 mm
• Clean and slightly dirty water, particles up to 5 mm
• Max. flow 170 l/min, head 8.5 m
• Motor 370 W, 230 V 50 Hz
• Built-in overheating protection
• 15 m discharge hose included
• 1″ and 1 1/4″ hose connectors included
• 5 m connection cable

Submersible pump STP-TOP25F – flat-bottom design

The flat-bottom design lets the pump draw water from a level of only 2.0 mm. So you remove the last water without extra equipment.

An ordinary submersible pump often leaves a layer of water on the floor. In contrast, a low suction level reduces this drying work.

The built-in overheating protection also adds safety and protects the motor from overheating.

Submersible pump STP-TOP25F – applications

The pump suits clean and slightly dirty water. The largest particle size is 5 mm, so fine dirt or small debris is fine.

Typical uses are basements, pools and wells. Thanks to the compact size and easy handling, it suits both occasional and repeated pumping.

Start-up of the Submersible pump STP-TOP25F set

The set comes ready to use. It includes a 15 m discharge hose and 1″ and 1 1/4″ hose connectors. So you can easily connect different hose sizes.

The 5 m connection cable reaches most household sites without extension cords. Place the pump at the lowest point, and then lead the hose to a drain or outside.

The maximum flow is 170 l/min, and the head is 8.5 m. However, the higher you lift the water, the smaller the flow.

Comparison with other pumps

For worksite use, see the STP2-480DW flat suction pump set. For sandy and muddy water, choose the STP2-500 sludge pump set instead.

You find all pumps in the submersible pumps group.

Safety

Never lift or lower the pump by its power cable. Instead, use a rope or the handle, and keep the plug dry above the water.

Check the cable before each use, and do not use a damaged pump. Also connect the pump to an RCD-protected socket.

A qualified electrician does repairs and electrical work. The requirements are explained on the Tukes website.

Submersible pump STP-TOP25F – technical data

Max. flow	170 l/min
Head	8.5 m
Motor size	370 W
Voltage	230 V 50 Hz
Suction level	down to 2.0 mm
Max. particle size	5 mm
Outlet size	1″ & 1 1/4″
Cable length	5 m
Discharge hose length	15 m
Protection	Overheating protection
Product number	401010019

Frequently asked questions

How low does the pump draw water?

The flat-bottom design draws water down to a level of 2.0 mm.

Does the pump suit dirty water?

It suits clean and slightly dirty water with particles up to 5 mm.

What does the set include?

The set includes the pump, a 15 m discharge hose and 1″ and 1 1/4″ hose connectors. The connection cable is 5 m.

What is the product number?

The product number (MPN) is 401010019. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

Tell us which space you want to empty and what the water is like. We then help you choose the right pump.