On a construction site, in a renovation project or after flood damage, removing water quickly is often decisive for the progress of the work, for safety and for costs. TSR-ELSITE submersible pumps are designed specifically for professional use, where pumps are required to deliver high performance, durability and reliability day after day. Our range covers solutions for pumping clean water, dirty water, sand, mud and slurry, as well as household dewatering needs.

Many of our professional submersible pumps, such as the models in the STP2 series, are delivered as a ready-to-use set including the pump, hose, connectors and a sturdy transport case. This way the pump is easy to take along on site without separate accessories. The higher-output contractor pumps are delivered as a pump unit to which the site’s own hosing is connected.

The right submersible pump for every application

The quality of the water largely determines which submersible pump to choose.

Dry-suction submersible pump for clean water

The STP2-480DW is an excellent choice when the aim is to remove water as thoroughly as possible. The pump’s innovative structure makes it possible to draw water from a level as low as 1 mm, so floors, concrete pours, cellars, tanks and swimming pools can be emptied almost dry without separate wet vacuums.

Typical applications include:

• dewatering after water damage
• drying concrete floors and pours
• emptying excavations on site
• emptying tanks after washing
• emptying swimming pools

Sludge pump for dirty water

When the water contains sand, mud, slurry or other solids, the right solution is the STP2-500 sludge pump. A cast iron body, a wear-resistant structure and a high flow capacity make it a reliable tool for demanding conditions.

The STP2-500 is particularly suited to:

• dewatering on construction sites
• emptying excavations
• drying ditches and hollows
• pumping sand, mud and slurry
• renovation and infrastructure construction

The pump’s construction also allows easy servicing, which reduces downtime and extends service life.

High-output contractor pumps for large volumes of water

When there is a lot of water and an ordinary pump is not enough, our range includes the STP3-1500T and STP4-3700T contractor pumps. They are intended for the large volumes of water found in extensive excavations, flooded areas and damage restoration.

The STP3-1500T moves up to 700 litres per minute and the STP4-3700T up to 1580 litres per minute. Both have a stainless body, IP68 enclosure and a 25 metre submersion depth. Note that these pumps require a 400 volt three-phase supply – they will not run from an ordinary 230 volt socket.

Contractor pumps are particularly suited to:

• emptying extensive excavations
• dewatering flooded areas
• damage restoration when a smaller pump is not enough
• equipment rental companies and continuous professional use

Wastewater pump for the most demanding use

For wastewater and other dirtier water, the Vortex 100M submersible pump is suitable. Both the pump housing and the impeller are made of stainless AISI304 steel and the shaft of acid-resistant steel, which extends service life in particularly demanding use.

Solutions designed for professional use

Unlike many pumps intended for consumer use, TSR-ELSITE site pumps are designed to withstand continuous use in demanding conditions.

The benefits of professional-grade pumps include:

• a durable metal structure
• a long service life
• high flow rates
• ready-to-use pump sets with hoses on many models
• high-quality hoses and connectors
• easy serviceability
• reliable operation even in demanding site conditions

These features make the pumps an excellent choice for construction companies, rental firms, industry, maintenance and water damage drying contracts.

An effective solution for households too

Although our focus is on submersible pumps for professional use, the range also includes the STP-TOP25F submersible pump set designed for households. It is suitable, for example, for:

• emptying a flooded cellar
• emptying a swimming pool
• removing rainwater
• emptying wells
• dewatering a yard

The pump can handle clean and slightly dirty water, and it can draw water from a level as low as about 2 mm. The ready-to-use set includes the pump, hose and connectors, so it is quick to put into service.

Why choose a TSR-ELSITE submersible pump?

When water has to be removed quickly and reliably, high pumping output alone is not enough. You need a unit that withstands site conditions, is easy to move from place to place and works dependably when it is needed.

TSR-ELSITE submersible pumps offer:

• solutions for both clean and dirty water
• options for dry-suction dewatering and sludge pumping
• ready-to-use pump sets as well as high-output contractor pumps
• high-quality components designed for professional use
• reliable operation on construction sites, in industry, in renovation projects and in property maintenance

Whether it is dewatering a site, drying after water damage, emptying an excavation or a flood situation in a home, our range has a submersible pump to suit the application.

Add the submersible pumps you need to the quotation basket from the product listing and you will get a quote quickly. If you are unsure which to choose, we are happy to help via chat or the form.