BAU LED 48VDC led strip 10m 950lm/m

Product code (SKU): 606040003

BAU LED 48VDC led strip 10m 950lm/m

BAU LED 48VDC led strip 10m 950lm/m – safe and efficient worksite lighting

The BAU LED 48VDC led strip 10m 950lm/m is designed for demanding worksite conditions that call for even, efficient and safe lighting. Running on 48 VDC extra-low voltage, it significantly reduces the risk of electric shock compared with a conventional 230 V system, which makes it well suited to damp, confined and challenging work environments.

Efficient and energy-saving

  • Light output 950 lm/m – bright, even light for working
  • Consumption 9 W/m – energy-efficient for long-running use
  • Ready-made 10 m length with connection cable – fast and easy to commission

The strip is always connected to the HUB 230/48VDC transformer, which has two circuits. Each circuit takes up to 40 m of strip, that is four 10 m strips, so one transformer runs up to 80 m of LED strip. The strip suits demanding environments such as shipyards, confined spaces, staircases, corridors and scaffolding.

Easy and safe to install on site

  • Fix the strip evenly on hooks or with cable ties
  • A cable tie must never cover the LED chips
  • The strip softens when warm – do not overtighten it
  • In vertical installations such as staircases, support the strip properly; it cannot carry its own weight
SKU: 606040003 Categories: ,
Download product sheet (PDF)

The BAU LED 48VDC led strip 10m 950lm/m is a light strip for demanding worksite conditions that runs on 48 V safety extra-low voltage. The ready-made 10 m strip with its connection cable gives even, bright light in damp and narrow spaces.

BAU LED 48VDC led strip 10m 950lm/m

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

BAU LED 48VDC led strip 10m 950lm/m – features

  • Light output 950 lm/m
  • Consumption 9 W/m
  • Ready-made 10 m length with pre-installed connection cable
  • 48 VDC safety extra-low voltage, light colour 5000 K
  • Protection class IP67
  • Connects to the HUB 230/48VDC transformer
  • Up to 80 m of strip per transformer

BAU LED 48VDC led strip 10m 950lm/m – where to use it

The strip is made for places where a normal luminaire does not fit, or where damp increases the risk of electric shock. Examples are shipyards, tunnels, confined spaces, staircases, corridors and scaffolding.

Compared with a 230 V system, extra-low voltage significantly reduces the risk of electric shock. Therefore the strip suits wet and challenging work environments well.

In addition, a continuous line of light improves visibility on walkways and scaffolding. Even light reduces the shadows that often lead to tripping.

Sizing and the transformer

The strip is always connected to the HUB 230/48VDC transformer; it is never wired directly to the 230 V mains. The transformer has two circuits, and each circuit takes up to 40 m of strip – that is four 10 m strips.

As a result, one transformer runs up to 80 m of strip. Consumption is 9 W/m, which keeps the load on the transformer light and cuts electricity use over long projects, when the lights burn all day. Keep the connections dry and protected during installation.

When you have more to light, add transformers and share the strips between them. For example, thanks to the two circuits, a staircase and a floor corridor can be on separate circuits. Leave room on the circuits for strips and luminaires added later.

Installation

Fix the strip evenly on hooks or with cable ties. A cable tie must never cover the LED chips.

The strip softens slightly when warm, so do not overtighten the ties. In vertical installations such as staircases, support the strip properly, because it cannot carry its own weight.

For hanging, the Julde multi-use hook works well. Pre-assembled cables speed up commissioning, and you can easily extend the system as work progresses.

BAU LED 48VDC led strip 10m 950lm/m as part of 48 V lighting

The HUB 48VDC lighting transformer powers the strip, and you share the strips between its two outputs.

You can find other strips and accessories in the LED strip product group.

Safety

Extra-low voltage minimises the risk of electric shock and fire. However, safety still requires an intact strip and cable, so check them before every installation.

A qualified electrician connects the transformer to the mains. The Tukes website explains the requirements for electrical work.

BAU LED 48VDC led strip 10m 950lm/m – technical data

Length 10 m, with connection cable
Voltage 48 VDC
Light output 950 lm/m
Consumption 9 W/m
Colour temperature 5000 K
Protection class IP67
Power supply HUB 230/48VDC transformer, 2 circuits
Strip per transformer up to 40 m per circuit, 80 m in total
Product number 606040003

Frequently asked questions

What does the strip connect to?

Always to the HUB 230/48VDC transformer, never directly to the 230 V mains. The transformer has two circuits.

How many strips can I connect to one transformer?

Each of the two circuits takes up to 40 m, that is four 10 m strips – 80 m in total.

How do I fix the strip?

Evenly on hooks or with cable ties. A tie must not cover the LED chips, and you must not overtighten it.

How much power does the strip use?

Consumption is 9 W/m.

What is the product number?

The product number (MPN) is 606040003. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and tell us the lengths of the corridors, stairs or scaffolding to be lit. We size the strips and transformers for your site.

Technical information

Voltage

48 VDC

Consumption

9 W/m

Light output

950 lm/m

Color temperature

5000 K

Enclosure class

IP67

Chaining together max.

80 m

Length

10 m

Related products