TESTBOY TV 416 ROTARY FIELD TESTER – the Testboy CEE Socket Tester gives you many different features in one product. It can, among other things, control the phase order and the product indicates the current configuration on a 16A CEE power outlet (TV416) or 32A power outlet (TV432). The product indicates installation status with glow lamps (condition / not installed or broken). Also acts as an adapter from a CEE socket to a conventional socket. When used with Testboy Testavit Schuki 1A, 1LCD or 2K, CEE RCDs can also be tested. User manual included. Five year guarantee.

TESTBOY TV 416 ROTARY FIELD TESTER on the worksite

Site accessories are small parts with a large effect. A missing hook, a failed tester or a worn timer stops the work just as effectively as a fault in the board itself.

It pays to keep a small stock of the most common accessories on site, so that a broken part does not turn into a stoppage.

Where TESTBOY TV 416 ROTARY FIELD TESTER is used

Typical sites are construction projects, renovations, industrial maintenance and event power. What they share is that the electrical supply is temporary and the conditions are demanding.

Temporary does not mean lighter requirements. Site equipment is exposed to dust, moisture, moving and mechanical stress in a way that fixed installations never are.

Check the load distribution between phases during use. Uneven distribution overloads one phase while the others run half empty, and the usual symptom is a fuse that keeps tripping.

How to choose the right model

The equipment is chosen by rated current and outputs. Start by calculating the simultaneous load and the output types needed, and choose the model on that basis.

Other models of the same type are Multi use hook Julde, TESTBOY TV 432 ROTARY FIELD TESTER, Enclosed clock switch 16A/230V, Enclosed clock switch 16A/400V, Testboy 230V schuko tester 3 LCD.

You can see the full range in the product group, and read about real-time monitoring on the Spine page.

Practical notes for use

Winter brings requirements of its own. Condensation forms when cold equipment is brought into the warm, and moisture inside the enclosure is a common reason for an RCD tripping with no visible cause.

Mark the equipment with the site details and keep a record of what is fed from where. On a site with several contractors that saves time at every fault-finding.

RCD protection is mandatory for socket outputs on a site. Its operation is tested with the test button at commissioning and at regular intervals afterwards.

TESTBOY TV 416 ROTARY FIELD TESTER – installation and maintenance

Installation and connection work is carried out by a qualified electrician. The equipment must be made dead before connection work, and the absence of voltage verified by measurement.

Place the equipment on level ground and so that it can be reached freely even when the site fills up with material. Material stacked in front blocks both use and emergency isolation.

Test the RCD with its test button at commissioning and at regular intervals afterwards. The test takes a second and is still almost always forgotten.

Check the joints and fixings regularly during use. A joint that heats up is a sign of a fault and should be corrected before the fault spreads.

Safety and inspections

Site electrical installations are subject to the same requirements as fixed installations, and some of them are stricter. The equipment has to withstand moving, dust, moisture and mechanical stress for the whole project.

The installation is inspected at commissioning and regularly during use: enclosure, joints, the operation of the protective devices and the fact that live parts cannot be reached.

Damaged equipment is not repaired improvised on site. A cracked enclosure, a burnt terminal or a damaged socket is replaced – on a site a temporary repair almost always becomes permanent.

Document the configuration and any changes made. Up-to-date information on outputs and protection speeds up fault-finding and the next inspection.

Delivery and sizing help

We deliver the equipment together with the cables and the rest of the site power supply in one delivery, so the set is complete when it arrives on site.

Describe the whole site in your request for quotation: supply power, the outputs needed and the estimated length of the project. We size the set on that basis.

Use the product number 155416 when ordering and when asking about spare parts. It identifies this exact model, which matters when the same series comes in several sizes.

We also help with the sizing. If you are unsure about the size or the number of outputs, ask us – equipment sized wrong costs more than equipment chosen right the first time.

TESTBOY TV 416 ROTARY FIELD TESTER – technical data

Model	TV 416
Use	16A CEE-rasia

Frequently asked questions

What is the product number?

The product number is 155416. Use it in requests for quotation and spare part enquiries.

Who may install the product?

Installation is carried out by a qualified electrician. The requirements are explained in more detail on the Tukes website.

The requirements for electrical installations on worksites are explained in more detail on the Tukes website.

Request a quotation

Add to the quotation basket and send us your request – we will confirm availability and delivery time at the same time. You can see the full range in the product group.