Modular site distribution board SCS-350 is a 5-module-slot worksite distribution cabinet built on ABB’s Fastline system, whose contents can be configured to match the exact needs of each site. Choosing only the fuse-switches and other components actually needed can save significant costs. The contents can be reconfigured again for the next site. Unused module slots are covered with blank plates.

Spine-ready with a load-level indicator light

The SCS board is Spine-ready, meaning the Spine system can be connected to it, for example via a Spine main switch module. Spine also makes an optional indicator light available, showing the board’s load level. Below 65% load the light at the top of the board glows green, at 65–85% load it glows yellow, and above 85% load it turns red.

Durable design for wall or ceiling mounting

The board has lifting loops and handles. It’s designed to be mounted on a wall or suspended from the ceiling. Made of powder-coated aluminium for corrosion resistance, the board withstands heavy handling on site. It has a lockable door.
This high-quality board is manufactured in Finland.

Modular site distribution board SCS-350 – technical data

• Number of module slots: 5
• Busbar: 400A
• Enclosure rating: IP44
• Short-circuit rating: Icf = 25 kA
• Weight: 18 kg
• Dimensions: 350 x 940 x 290 mm

Does this model suit your site? Add the product to the quote cart at the top of the page to get a quote.

Modular site distribution board SCS-350 on the worksite

The distribution board is the site’s outlet point: power for hand tools, lighting and dryers is taken from it. It is placed close to the work so that extension cords stay short.

Boards are added as the site grows. The whole is worth planning in advance so that the supply is sufficient for all of them.

Where Modular site distribution board SCS-350 is used

Typical sites are construction projects, renovations, industrial maintenance and event power. What they share is that the electrical supply is temporary and the conditions are demanding.

Temporary does not mean lighter requirements. Site equipment is exposed to dust, moisture, moving and mechanical stress in a way that fixed installations never are.

Check the load distribution between phases during use. Uneven distribution overloads one phase while the others run half empty, and the usual symptom is a fuse that keeps tripping.

Modular site distribution board SCS-350 – how to choose the right model

The equipment is chosen by rated current and outputs. Start by calculating the simultaneous load and the output types needed, and choose the model on that basis.

Other models of the same type are Temporary power supply subcabinet 250 A, Sub cabinet 160 A, Sub cabinet TAK 125A KS, Sub cabinet TAK 63 A KS, Subcabinet TAK 32A.

Other details that affect the choice: protection class IP44, short-circuit withstand lcf = 25 kA, weight 18 kg, dimensions 350 x 940 x 290 mm. These are worth checking already at the quotation stage.

You can see the full range in the product group, and read about real-time monitoring on the Spine page.

Modular site distribution board SCS-350 – practical notes for use

Winter brings requirements of its own. Condensation forms when cold equipment is brought into the warm, and moisture inside the enclosure is a common reason for an RCD tripping with no visible cause.

Mark the equipment with the site details and keep a record of what is fed from where. On a site with several contractors that saves time at every fault-finding.

RCD protection is mandatory for socket outputs on a site. Its operation is tested with the test button at commissioning and at regular intervals afterwards.

Modular site distribution board SCS-350 – installation and maintenance

Installation and connection work is carried out by a qualified electrician. The equipment must be made dead before connection work, and the absence of voltage verified by measurement.

Place the equipment on level ground and so that it can be reached freely even when the site fills up with material. Material stacked in front blocks both use and emergency isolation.

Test the RCD with its test button at commissioning and at regular intervals afterwards. The test takes a second and is still almost always forgotten.

The unit weighs 18 kg. Take the weight into account when moving and lifting – damage is most often caused during transport, not in use.

Check the joints and fixings regularly during use. A joint that heats up is a sign of a fault and should be corrected before the fault spreads.

Modular site distribution board SCS-350 – safety and inspections

Site electrical installations are subject to the same requirements as fixed installations, and some of them are stricter. The equipment has to withstand moving, dust, moisture and mechanical stress for the whole project.

The installation is inspected at commissioning and regularly during use: enclosure, joints, the operation of the protective devices and the fact that live parts cannot be reached.

Damaged equipment is not repaired improvised on site. A cracked enclosure, a burnt terminal or a damaged socket is replaced – on a site a temporary repair almost always becomes permanent.

Document the configuration and any changes made. Up-to-date information on outputs and protection speeds up fault-finding and the next inspection.

Delivery and sizing help

We deliver the equipment together with the cables and the rest of the site power supply in one delivery, so the set is complete when it arrives on site.

Describe the whole site in your request for quotation: supply power, the outputs needed and the estimated length of the project. We size the set on that basis.

Use the product number 505010014 when ordering and when asking about spare parts. It identifies this exact model, which matters when the same series comes in several sizes.

We also help with the sizing. If you are unsure about the size or the number of outputs, ask us – equipment sized wrong costs more than equipment chosen right the first time.

Frequently asked questions

Can I choose the board’s contents myself?

Yes. Only the fuse-switches and other components needed for the specific site are chosen, and unused module slots are covered with blank plates. The contents can be reconfigured again for the next site.

How does Spine-readiness work on the board?

The Spine system can be connected to the board, for example via a Spine main switch module. The optional indicator light shows the board’s load level in color.

What do the indicator light colors mean?

Below 65% load the light glows green, at 65–85% load yellow, and above 85% load red.

Where is the board manufactured?

The board is manufactured in Finland from powder-coated aluminium, making it corrosion-free and able to withstand heavy handling on site.

What is the product’s part number?

The part number is 505010014. You can use it for orders and quote requests.
Didn’t find the answer to your question? Add the product to the quote cart and our sales team will help — or open the chat in the bottom-right corner of the page.

What is the protection class?

Protection class: IP44.

What is the short-circuit withstand?

Short-circuit withstand: lcf = 25 kA.

What are the dimensions?

Dimensions: 350 x 940 x 290 mm.

How much does the product weigh?

Weight: 18 kg.

What is the product number?

The product number is 505010014. Use it in requests for quotation and spare part enquiries.

Who may install the product?

Installation is carried out by a qualified electrician. The requirements are explained in more detail on the Tukes website.

Request a quote for Modular site distribution board SCS-350

Explore other modular distribution boards and modules and Spine products.
Once you’ve found the right model, add it to the quote cart. You can collect several products in the cart and send the whole list in one request.

Request a quotation

Add to the quotation basket and send us your request – we will confirm availability and delivery time. You can see the full range in the product group.