Fixed-supply distribution box 32A is a light case-type board for worksites, events and temporary installations. It has a fixed cable supply, so a qualified electrician must install it.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

Fixed-supply distribution box 32A – features

• Rated current 32 A, rated voltage 400 V
• Outlets 6 x 16A/230V Schuko, 2 x 16A and 2 x 32A
• RCD 40 A 30mA and miniature circuit breakers
• Phase meters for load monitoring
• Bals sockets and Schneider RCDs under a clear cover
• ABS housing, IP44
• Wall hanging or carrying by the handle
• Weight 4.3 kg, dimensions 36.5×44×12 cm
• CE marked

Phase measurement and unbalanced load

On a site, the load does not always spread evenly between the phases. We call this an unbalanced load. As a result, fuses can trip and work can stop.

Therefore, in the Fixed-supply distribution box 32A, phase meters show the load of every phase. So you can divide the load evenly, and the site network runs without needless breaks.

Outlets for hand tools and machines

The board has 6 x 16A/230V sockets, 2 x 16A and 2 x 32A outlets. Therefore, one point feeds small hand tools as well as larger devices.

In addition, a 40A/30mA RCD and miniature circuit breakers protect the outlets.

Quality components under a clear cover

The board uses durable Bals sockets and Schneider RCDs under a clear and safe cover. Moreover, the ABS housing is durable but light.

Also, you can hang it on a wall or carry it by its handle.

Fixed-supply distribution box 32A – who is it for?

The board suits sites that need a fixed supply installed by an electrician together with per-phase load monitoring. For example, this applies to events and sites where the load varies a lot during the day.

Part of worksite power distribution

A case-type board is light and portable, so it suits short jobs and small sites. You can take it into use quickly, and you can also move it just as quickly.

Also see the full range under sub-distribution boards with fixed supply. For plug-in models, see the plug-on sub-distribution boards, and read about real-time monitoring on the Spine page.

Fixed-supply distribution box 32A – safety

Only a qualified electrician makes the connection. First, the electrician isolates the board and then verifies by measurement that it is dead.

Test the RCD with its test button at commissioning and then at regular intervals. In addition, check the tightness of the connections after the first day under load.

Also, never repair a damaged board with improvised fixes on site. Instead, replace a cracked enclosure, a burnt terminal or a damaged socket. You can read more about the requirements for site installations on the Tukes website.

Fixed-supply distribution box 32A – technical data

Rated current	32 A
Rated voltage	400 V
Sockets	6 x 16A/230V Schuko, 2 x 16A, 2 x 32 A
Residual current device (RCD)	40 A 30mA
IP rating	IP44
Material	ABS
Dimensions (L×H×D)	36.5×44×12 cm
Weight	4.3 kg
Approvals	CE
Product number (MPN)	5000347

Frequently asked questions

Why should I monitor an unbalanced load?

An unbalanced load can trip fuses and cause interruptions. Therefore, the phase meters help you spread the load evenly.

Does the fixed supply need an electrician?

Yes. Only a qualified electrician may connect the fixed cable supply.

Can I hang the Fixed-supply distribution box 32A on a wall?

Yes. You can hang the housing on a wall or carry it by its handle.

What is the IP rating?

The IP rating is IP44.

What is the product number?

The product number (MPN) is 5000347. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and describe the whole site: the supply power, the outlets you need and the estimated project duration. Then we size the set on that basis.