Concrete curing cable 3.3m is a 130 W heating cable element for curing and drying concrete pours. The cable prevents the pour from freezing and speeds up drying.

Add the product to the quotation basket and send your request – we confirm availability and delivery time at the same time.

Concrete curing cable 3.3m – features

• Length 3.3 m
• Output 130 W
• 2 m connection cable with plug
• Weight 0.43 kg
• Prevents the pour from freezing and speeds up drying
• Reusable for later drying of the building frame

How the curing cable works

You fix the cable to the reinforcement before concreting. When you switch on the voltage, the cable heats the pour from the inside.

The heat prevents freezing and speeds up drying of the concrete. As a result, a winter pour stays on schedule.

After curing, you can dry the building frame by reconnecting the cables. Therefore, do not cut off the supply cables.

Concrete curing cable 3.3m – choosing the length

The shortest cable in the series suits small pours and repairs where a longer cable would be surplus. Its output is 130 W.

If the pour is larger, however, the next size is the 10 m cable (380 W).

The series has six lengths. For example, the outputs are 3.3 m: 130 W, 10 m: 380 W and 20 m: 735 W. The longer cables have 35 m: 1400 W, 55 m: 2200 W and 85 m: 3200 W.

Concrete curing cable 3.3m – installation

Install the cables only against non-combustible structures and in accordance with electrical safety regulations.

Leave the 2-metre connection cable and the plug outside the pour. This way, you can also connect the cable later for drying.

For temperature monitoring, use a concrete thermometer and K-type sensors.

You can find all lengths on the heating and thawing page. In addition, other winter site supplies are among the site heating accessories.

Safety

The cables are intended only for curing and drying concrete pours. Therefore, do not use them for other heating.

Connect the cable to an RCD-protected socket on the site distribution board, and check the connection cable before use. A qualified electrician makes the electrical connections. You can read about the requirements for electrical work on the Tukes website.

Concrete curing cable 3.3m – technical data

Length	3.3 m
Output	130 W
Connection cable length	2 m, with plug
Weight	0.43 kg
Use	Curing and drying concrete pours
Product number	302030001

Frequently asked questions

What is the output of the cable?

The output is 130 W, and the length is 3.3 m.

Can you cut the supply cable after pouring?

It is better not to. You can reconnect the cables later to dry the building frame.

Which structures can you install the cable against?

Only against non-combustible structures and in accordance with electrical safety regulations.

What is the product number?

The product number (MPN) is 302030001. Use it in quotation requests.

Request a quote

Add the product to the quotation basket and tell us the size and timing of the pour. We size the cable lengths and quantity for your site.