Light mast 4 m with winch

Product code (SKU): 2353348

Light mast 4 m with winch

Light mast 4 m with winch raises work-site floodlights to four metres with one person. The crank-operated wire winch carries 80 kg, and the crossbar takes two floodlights – six with the Hexagon top.

  • Working height 1.76–4.00 m
  • Crank-operated wire winch, load capacity 80 kg
  • 2 floodlights as standard, 6 with the Hexagon top
  • Weight 26 kg, packed size 180 × 17 × 17 cm

Add the product to the quotation basket and we will send a quote and confirm the delivery time.

SKU: 2353348 Categories: ,
Download product sheet (PDF)

Light mast 4 m with winch – telescopic stand on a tripod base

Light mast 4 m with winch is a telescopic stand for work-site floodlights, halls and events. The height adjusts from 1.76 metres to four metres, and the crank-operated wire winch raises the lights with one person.

Add the product to the quotation basket and tell us the quantity you need. We will send a quote for that quantity and confirm the delivery time.

Light mast 4 m with winch – features

  • Working height 1.76–4.00 m
  • Crank-operated wire winch
  • Load capacity 80 kg
  • Crossbar takes two floodlights
  • Six floodlights with the separate Hexagon top
  • Folding tripod base
  • Black painted steel structure
  • Weight 26 kg
  • Packed size 180 × 17 × 17 cm
  • Blue Electric, model ST5

Light mast 4 m with winch rises with one person

The floodlights are bolted to the crossbar while the mast is down. Only then is the mast cranked up to working height.

The winch carries the load throughout the lift. Nobody has to hold lights overhead, and one fitter is enough even with two large floodlights.

The telescopic tube is secured with a locking pin. The winch holds the load and the pin keeps the height in place.

Close-up of the crank winch, locking pin and telescopic tube

From two floodlights to six

As standard the mast has a T-shaped crossbar for two floodlights. Two 200-watt LED floodlights give roughly 76,000 lumens in total.

When more light is needed, a six-position Hexagon top is fitted to the upper tube. Six floodlights then cover the whole work area.

Suitable lights include our 100-watt and 200-watt LED floodlights. Six 200-watt units weigh about 25 kg in total, so the 80 kg load capacity leaves a clear margin.

Mast raised to working height with two LED floodlights on the crossbar

Stable tripod and 80 kg load capacity

The base is a folding tripod. The legs open out for setting up and fold back against the tube for transport.

Load capacity is 80 kg. That covers six LED floodlights with their brackets by a clear margin.

The frame is black painted steel. The telescopic tube slides inside the frame and the winch cable runs protected along the tube.

Where the light mast 4 m with winch is used

On a building site the mast lights a work station, a walkway or a slab pour. Moving it to a new spot needs no tools.

In a rental fleet the same stand serves several different luminaires. Equipment lasts longer when the lift is done with a winch instead of by hand.

At events and film shoots four metres is enough to light a stage or a parking area. Workplace lighting requirements are explained by the Finnish Occupational Safety and Health Administration.

Light mast 4 m with winch in transport and storage

Folded down the mast is 180 cm long and 17 cm thick. It fits on a van floor and on a warehouse shelf.

Weight is 26 kg. One person carries it a short distance; for anything longer, use a trolley.

If you need more height, see the five-metre model, which reaches one metre higher.

Hexagon top that increases the mast to six floodlights

What the light mast 4 m with winch includes

The delivery contains the mast with its tripod, the winch and the T-shaped crossbar. Floodlights are not included; they are chosen according to the light needed on site.

The Hexagon top is a separate product. Order it at the same time if you know you need more than two floodlights.

Mounting hardware comes with the floodlight. Check the bracket dimensions before ordering if you use a luminaire from outside our range.

Safe use on site

Set the mast on level ground and open the legs fully. Before lifting, check that the load is shared on both sides of the crossbar.

Lower the mast in strong wind and always before moving it. The mast is moved down, never with the lights up.

Follow the luminaire manufacturer’s instructions and use a qualified electrician for electrical work.

Light mast 4 m with winch – technical data

Structure Telescopic tripod stand
Material Steel, black painted
Lifting device Crank-operated wire winch
Height locking Locking pin
Packed size 180 × 17 × 17 cm
Manufacturer Blue Electric
Model ST5
EAN 5711804022123

Frequently asked questions

How high does the light mast 4 m with winch reach?

The lowest working height is 1.76 m and the highest 4.00 m. The height is cranked up with the winch and secured with the locking pin.

How many floodlights fit on the mast?

The standard crossbar takes two floodlights. With the Hexagon top there is room for six, each up to 200 W.

How much does the mast weigh?

The mast weighs 26 kg. Folded down the packed size is 180 × 17 × 17 cm.

Are tools needed to set it up?

No. The legs open by hand and the height is set with the crank. Mounting the floodlights uses the bracket supplied with the luminaire.

What is the product number?

The product number is 2353348 and the EAN code 5711804022123. Use the number in quotation requests and spare part orders.

Request a quote and check availability

Add the product to the quotation basket and tell us how many masts you need. A quotation request commits you to nothing: we send a quote for the requested quantity and confirm the delivery time. If you want to check compatibility first, the chat opens in the bottom right corner of the page.

Technical information

Height

1,76–4,00 m

Load capacity

80 kg

Max. number of lights

2

Weight

26 kg

Dimensions packed

180 × 17 × 17 cm

Manufacturer and model

Blue Electric ST5

You may also like…